Script to optimize apache webserver


#!/bin/bash
# Credits Gus Maskowitz, Rob Wilderspin, Dan Farmer, Mark Hyde
# ===================================== DO SECTION =====================================
ME=`whoami`
LAST_ECHO=0
TYPE_ECHO=0
if [ "$ME" != "root" ]; then
echo “You’ll need to be root to run this”
  exit 1
fi
/sbin/service httpd status 2>&1 >/dev/null
if [ $? -ne 0 ]; then
exit 0
fi
apachetuner_version=”Apachetuner v1.0″
if [ -f /etc/redhat-release ]; then
system=$(cat /etc/redhat-release)
else
echo “This does not appear to be Red-Hat and is unfortunately not yet supported”
  exit 0
fi
# This was written specifically for a Rackspace environment
if [ -f /root/.rackspace/server_number ]; then
server_number=$(cat /root/.rackspace/server_number)
fi
server_name=$(uname -n)
server_httpd_rpm=$(rpm -qf $(which httpd))
memtotal_mb=$(awk ‘/MemTotal/ {printf “%d”, $2/1024}’ /proc/meminfo)
# mem_alert_level=$(echo $memtotal_mb | awk ‘{printf “%d”, $0 * 0.9}’)
#### The following cointributed by Mark Hyde
HTTPD_V_TMPFILE=$(mktemp)
httpd -V > $HTTPD_V_TMPFILE
apache_architecture=$(awk -F’: +’ ‘$1~/^Architecture/{print $2}’ ${HTTPD_V_TMPFILE} )
apache_mpm=$(awk -F’: +’ ‘$1~/^Server MPM/{print $2}’ ${HTTPD_V_TMPFILE} )
apache_server_version=$(awk -F’: +’ ‘$1~/^Server version/{print $2}’ ${HTTPD_V_TMPFILE} )
config_file=’/etc/httpd/conf/httpd.conf’
# Thank you to Rob Wilderspin for this magic…
eval $(awk ‘/\<IfModule prefork.c\>/,/<\/IfModule/ \
{/^ServerLimit/ && s=$2; /^MaxClients/ && m=$2} \
END {printf “serverlimit=%d maxclients=%d”, s, m}’ $config_file)
httpd_root=$(awk -F\” ‘/HTTPD_ROOT/ {print $2}’ $HTTPD_V_TMPFILE)
httpd_server_config_file=$(awk -F\” ‘/SERVER_CONFIG_FILE/ {print $2}’ $HTTPD_V_TMPFILE)
httpd_default_errorlog=$(awk -F\” ‘/DEFAULT_ERRORLOG/ {print $2}’ $HTTPD_V_TMPFILE)
# Dan Farmer created this logic to find the size of each additional apache in memory.
apacheuser=$(ps -ef|awk ‘/httpd/ && !/root/ {print $1}’ | uniq)
num_of_apache_children=$(ps -u $apacheuser -o pid= | wc -l)
apache_in_ram=$(ps -u $apacheuser -o pid= | xargs pmap -d | awk ‘/private/ {c+=1; sum+=$4} END {printf “%.2f”, sum/c/1024}’)
apache_footprint=$(echo $apache_in_ram*$num_of_apache_children | bc -l)
ram_at_maxc=$(echo $maxclients*$apache_in_ram|bc -l)
mem_percentage_at_max=$(echo $ram_at_maxc/$memtotal_mb*100 | bc -l)
# echo $mem_percentage_at_max
if [ -f /etc/php.ini ]; then
php_meml=$(awk ‘/^memory_limit/ {print $3}’ /etc/php.ini);
else
echo “Checking for /etc/php.ini Not found”;
fi
http_binary=$(netstat -plnt |grep :80|awk -F/ ‘{print $2′})
# =================================== DISPLAY SECTION ===================================
echo “
=========================SYSTEM=========================”
echo “$system
“
# This was written specifically for a Rackspace environment
if [ -f /root/.rackspace/server_number ]; then
echo “Server Number: $server_number
“
fi
echo “Server Name: $server_name
Total Physical Memory: $memtotal_mb MB
=========================APACHE=========================”
echo “Version: $apache_server_version
RPM: $server_httpd_rpm
httpd binary: $(which $http_binary)
Whats running on port 80 $(netstat -plnt |grep :80|awk ‘{print $7}’)
Apache Architecture: $apache_architecture”
echo “Serverlimit is: $serverlimit
MaxClients is: $maxclients”
echo “httpd root $httpd_root
httpd server config file $httpd_root/$httpd_server_config_file
httpd default errorlog $httpd_root/$httpd_default_errorlog”
echo “
=========================PHP============================
/etc/php.ini memory_limit is: $php_meml
=====================APACHE RUNTIME=====================
Apache user: $apacheuser
Average Memory use: $apache_in_ram MB per child
Number of children: $num_of_apache_children
=========================REPORT==========================
Current memory footprint $apache_footprint MB
Maximum memory footprint $ram_at_maxc MB ($(printf %0.f $mem_percentage_at_max)% of installed RAM)
System memory divided by MaxClients $(printf %0.00f $(echo $memtotal_mb/$maxclients |bc -l))
System memory divided by Apache child size $(printf %0.f $(echo $memtotal_mb/$apache_in_ram | bc -l))
“
rm “$HTTPD_V_TMPFILE”
echo

Comments

Post a Comment

Popular posts from this blog

Using a Linux server to route packets between two private networks

Image
Reference: http://www.tecmint.com/setup-linux-as-router/ We want to route icmp (ping) packets from dev2 to dev4 and the other way around as well (note that both client machines are on different networks). The name of each NIC, along with its corresponding IPv4 address, is given inside square brackets. Our test environment is as follows: Client 1 : CentOS 7 [enp0s3: 192.168.0.17/24] - dev1 Router : Debian Wheezy 7.7 [eth0: 192.168.0.15/24, eth1: 10.0.0.15/24] - dev2 Client 2 : openSUSE 13.2 [enp0s3: 10.0.0.18/24] - dev4 Let’s view the routing table in dev1 (CentOS box): # ip route show and then modify it in order to use its enp0s3 NIC and the connection to 192.168.0.15 to access hosts in the 10.0.0.0/24 network: # ip route add 10.0.0.0/24 via 192.168.0.15 dev enp0s3 Which essentially reads, “Add a route to the 10.0.0.0/24 network through the enp0s3 network interface using 192.168.0.15 as gateway”. Route Network in Linux Likewise in dev4 (openSUSE box) to ping h
Read more

PHP Fatal error: Class 'JFactory' not found

I have faced this issue in Joomla site and searched the forums but none of the forums including joomla did not give solution for me. They simply suggest to check joomla version, php version compatibility and php extensions. Finally I have fixed the issue. Issue:- ---------  [26-Sep-2014 18:11:29 Europe/Berlin] PHP Fatal error: Class 'JFactory' not found in /home/test/public_html/index.php on line 31 Cause & Solution:- ----------------------- In my case, it seems file which gives the class JFactory was missed. /home/test/public_html/libraries/joomla/factory.php --->Core file for Joomla. Simply restore that file under proper path to fix the issue.
Read more

KVM & Qemu

QEMU is a powerful emulator, which means that it can emulate a variety of processor types. Xen uses QEMU for HVM guests, more specifically for the HVM guest's device model. The Xen-specific QEMU is called qemu-dm (short for QEMU device model) QEMU uses emulation; KVM uses processor extensions (intel-VT) for virtualization. Both Xen and KVM merge their various functionality to upstream QEMU, that way upstream QEMU can be used directly to accomplish Xen device model emulation, etc. Xen is unique in that it has paravirtualized guests that don't require hardware virtualization. Both Xen and KVM have paravirtualized device drivers that can run on top of the HVM guests. The QEMU hypervisor is very similar to the KVM hypervisor. Both are controlled through libvirt, both support the same feature set, and all virtual machine images that are compatible with KVM are also compatible with QEMU. The main difference is that QEMU does not support native virtualization. Consequently, QEMU has
Read more